EOS 5D Mark II Firmware Update Version 2.0.8
Опубликовано 19 Октябрь 2010 | 
Обновленная прошивка для EOS 5D Mark II
EOS 5D Mark II Firmware Update Version 2.0.8
- This firmware update (Version 2.0.8) incorporates the following changes and fixes.
Fixes a phenomenon in which movies are not taken at the shooting mode registered in the user’s settings if a shooting mode Aperture priority (or Shutter priority) is registered in any of the camera’s user settings (C1, C2, C3) and the user attempts to shoot a movie.- Fixes a phenomenon in which the shutter will not release when pressing the shutter button when the auto power off function is set to «on».
- Fixes a phenomenon in which overexposure occurs when shooting a Live View shooting simulation with the ISO speed set to L.
- Fixes a phenomenon in which the settings of the Speedlite transmitter ST-E2 revert to the default settings when both the camera and the ST-E2 are set to auto power off.
- Fixes a phenomenon in which the Macro Ring Lite (MR-14EX, MT-24EX) and slave flash do not sync while shooting wirelessly.
Качнуть можно здесь
Canon 5D Mark II firmware v2.0.4
Опубликовано 16 Март 2010 |
Сегодня компания Canon открыла доступ для скачивания новой прошивки 2.0.4 для камеры Canon 5D Mark II. Новая прошивка, в основном, направлена на улучшения качества видео в камере.
Изменения:
EOS 40D Firmware Update Version 1.1.1
Опубликовано 21 Январь 2009 | Граждане, Товарищи!!! Вышла прошивочка под сороковочку. Фиксы ниже. Файлы тоже.
Firmware update Version 1.1.1 incorporates the following fixes and improvements.
- Fixes a malfunction that in rare occurrence causes a low battery indication to be displayed when using the EF 85mm F1.2L II USM lens. Depending on the battery check timing of the camera, the battery level displayed on the camera’s LCD data panel may shows Battery will be exhausted soon or Battery must be recharged, even though the battery capacity is sufficient.
- Fixes a malfunction that in rare occurrence causes an Err 06 Self Cleaning Sensor malfunction to appear on the camera’s LCD monitor and LCD data panel, even when the Self Cleaning Sensor Unit is operating normally. This message may appear depending on the timing of when the camera is switch to the ON position.
- Fixes a malfunction that prevents correct colors from being printed when direct printing. RAW images captured using the camera’s custom Picture Styles (Emerald, etc.), which have been downloaded from Canon’s Web site and registered under User Def. 2 or User Def. 3.
- Modifies the level of subject brightness that causes the AF-assist beam to fire when using an external Speedlite.
- Enables an external flash connected to the camera’s synchro terminal to fire even when the camera’s built-in flash is popped up.
Version 1.1.1 firmware is for EOS 40D cameras with firmware up to Version 1.1.0. If the camera’s firmware is already Version 1.1.1, it is not necessary to update the firmware.
Сам мануальчик тут.
Файлег для Win
Файлег для Mac
P.S. Я обновился. Все Круто! Официальная страничка здеся